Видео

Helpful

Perfect, thank you!

Why on earth they use 304 stainless steel for the blade that's absolutely not suitable for marine use as opposed to 316 that's far superior???? Only one thing comes to my mind - if not maintained after each use rusty knife quickly going into bin in order to buy another one! Make sure you wash both the knife and sheath (most people forget salt water stays inside and corrode blade) throughly then apply silicone grease. "However, 304 stainless steel does have one weakness, and that is it does not perform well in chloride environments, in particular, seawater. It is susceptible to corrosion in these cases. If marine corrosion is a major concern, a better choice would be 316 stainless steel, which has 2 percent molybdenum added to it." What a waste of material... am still looking for a dive knife that will do its job and last long...

Thanks, wanted to get started with scuba diving for a long time now, this really helped out a lot!

I had the HD200 and sold it. The large air cell has a large airless gap at the bottom due to the shape of it. This sacrificed my trim. I bought a donut style air cell and never looked back. For the ultimate trim and minimum bulk just get a plate and some webbing.

Good stuff mate. Thx for the heads up 👍🏽

I recommend you always purge the 2nd stage before simply sucking on it. A friend blew a front tooth out by not firstly purging the reg.

Great info man, thanks for taking the time to make this! Hope to come by your shop if I ever get to visit your lovely country!

Just an addition to closing the valve as you leave your gear or for transport, Let the pressure off of the reg set so you SEE the air is turned off.

Very helpful. Thanks mate!

Good refresher. Thanks!

The ol' reach-around...

❤

You're Australian 🐨🦘🪃🇦🇺

Inhales on the surface do not assure that the valve is fully opened.

Check ur O ring(s)

superb instruction ---clear and concise big TY from the uk

Very Nice! thanks!

Let's say the boat leaves you and your friend. Both have the rear inflation bcd's. Will they get so tired of trying to stay upright they'll tire out ending up face down?

Very helpful. I do have one confusion though. What is the purpose of turning the task valve back off during transport/waiting for the dive?

Great video demo. Very much appreciated

Nice pleace ...awesome 👌

Absurd. Get a backplate and wing or sidemount. All these goofy BCs have too many pockets and d-rings.

This is the worst description of determining the correct weight and conducting a weight buoyancy test I have ever seen. They are forgetting to describe the equipment you should have on and if the BC should be fully inflated, deflated etc. This video is a disservice to a novice diver.

Very nice review. Thanks!

Step one…get rid of the yellow death hose and strap a 7’ hose onto the rig…learn to long hose primary donate if you really want to up the safety level of your diving

Super clear - thanks!

Great info

Great job everyone!

Never seen any reference to rinsing Aqualung ACD regs with the cap OFF (including AL's user manuals)...unless you have a citation to a source for this, I'm calling foul 🤔

Thanks you sir!

Great presentation. Very helpful. Thank you Jeremy.

No the octopus doesn't need to be on the right side. Far from it

expensive pleasure(((

Very detailed and well structured thank you ❤️

Thanks

Two items, 1 The hard sole boot is better as it supports the fin strap as I have used soft boots and the fin strap has worked down and my fin has come off, 2 the zipperless boots are great to get on, a bugger to get off as they tend to suck to your feet.

pretty good video

Maybe..or THE best instruction for refresher. 9 THANK YOU!!

I have a feeling that if you don’t know how to dump air from your BCD you probably should not be certified. 🤷‍♂️

I'm a bit confused by this video. Presumably, when you say jump in the pool with no gear, mask and snorkel you need to weight yourself UNTIL the water level is halfway up your mask? Otherwise, what is it telling you? BUT if you do it with no kit won't you be overweighted with a cylinder (Steel one at least)? I know I am... If I jump in the pool with no kit on I would need weight to sink to that level, but with a 12L cylinder on I'm very negatively buoyant in pool water.

I have been looking for this explanation/advice for the last hour. Thank you. The pocket on the M/L Frog Plus is comfy, but my boot goes all the way in. Just ordered a smaller size. Thanks for the help. 🥳

Great, thanks!

Just how much air trouble do you have with the Hollis HD200 ? I’m leaning heavily toward it

Thank you so much for this video! I just got back from a diving trip and was not sure how to clean my BCD. Your instructions were so easy to follow.

Handy tips thanks

Do you sell?

I wonder how the light temperature affects the vision under water. 6500K is a cold white, where 3000K is yellow. I would like to know if the yellow light would make the colors seem more natural because reds & yellows don’t travel deeper? What Kelvin do you recommend for a dive torch? Thank you.

2 fingers going in there….that’s what … eh … never mind.

great refresher, going tomorrow! thanks